Shared Label


SHARED Kitchen printer device type can be changed under HARDWARE settings.

MENU > SETTING > HARDWARE > KITCHEN > SHARED > KITCHEN #1 > DEVICE TYPE to LABEL PRINTER

      Check the USE box and select LABEL PRINTER as DEVICE TYPE.

      Select PORT TYPE depending on how the kitchen printer is connected to the POS system;

        -If you choose WINDOWS DIRECT as your PORT TYPE, you will also have to enter the WINDOWS PRINTER NAME.

        -If you choose COM as your PORT TYPE, you will have to enter the PORT NUMBER and BAUD RATE.

        -If you choose LPT as your PORT TYPE, you will have to enter PORT NUMBER.

 

SharedLabel1

 

      Input WINDOWS PRINTER NAME for the kitchen printer you will be using.

      Customizable options for the kitchen printer and receipts can be found and set through OPTIONS.

      COPIES refers to the number of receipt copies the kitchen printer will print.

 

Sharedlabel2

 

      FONT SIZE, FONT STYLE and FONT can all be adjusted here.

      Set PAPER HEIGHT, PAPER WIDTH, MARGIN LEFT or RIGHT to your liking.

      Choose desired LINE SPACING for kitchen printer receipts/tickets.

 

SharedLabel3

 

      If you would like enable status checks for the kitchen printer; choose preferred status check METHOD, enter the IP address and PORT.

      Lastly, set a time for the FREQUENCY of the status checks and choose a printer to enable FAILOVER.

      If your kitchen printer is down for whatever reason, the printer chosen for FAILOVER will print those tickets/receipts as well.

 

SharedLabel4