Local Graphic (Windows)


Local Kitchen printer device type can be changed under HARDWARE settings.

MENU > SETTING > HARDWARE > KITCHEN > LOCAL > KITCHEN #1 > DEVICE TYPE to GRAPHIC (WINDOWS)

      Check the USE box and select GRAPHIC (WINDOWS) as DEVICE TYPE.

      Select PORT TYPE depending on how the kitchen printer is connected to the POS system.

     If you choose WINDOWS DIRECT as your PORT TYPE you will also have to enter the WINDOWS PRINTER NAME.

      Input PORT NUMBER and BAUD RATE.

      Enter desired PRINT WIDTH for the kitchen printer receipts.

 

LocalGraphic1

 

      Customizable options for the kitchen printer and receipts can be found and set through OPTIONS.

      Enabling AUTO CUT will automatically cut and seperate tickets/receipts after they are printed.

      COPIES refers to the number of receipt copies the kitchen printer will print.

      FONT SIZE, FONT STYLE, FONT, and PAPER WIDTH can all be adjusted here.

 

LocalGraphic2

 

      PAPER HEIGHT can be adjusted and MARGIN LEFT or RIGHT can also be set to your liking.

      Choose desired LINE SPACING for kitchen printer receipts/tickets.

      INDIVIDUAL SEND DELAY allows an individual item to be delayed for a set amount of time.

 

LocalGraphic3

 

      If you would like enable status checks for the kitchen printer; choose preferred status check METHOD, enter the IP address and PORT.

      Lastly, set a time for the FREQUENCY of the status checks and choose a printer to enable FAILOVER.

      If your kitchen printer is down for whatever reason, the printer chosen for FAILOVER will print those tickets/receipts as well.

 

LocalGraphic4